driver seat adjustment KIA CADENZA 2020 Owners Manual

Page 22 of 560

Safety features of your vehicle
6 3
Feature of Seat Leather
Leather is made from the outer
skin of an animal, which goes
through a special process to be
available for use. Since it is a nat-
ural substance, each part differs in
thickness or density.
Wrinkles may appear as a natural
result of stretching and shrinking
depending on the temperature and
humidity.
The seat cover is made of stretch-
able material to improve comfort of
passengers.
The parts contacting the body are
curved and the side supporting
area is high which provides driving
comfort and stability.
WARNING- Unexpected
Seat Movement
After adjusting a manual seat,
always check that it is locked by
shifting your weight to the front
and back. Sudden or unexpect-
ed movement of the driver's
seat could cause you to lose
control of the vehicle.WARNING - Rear seatbacks
Always lock the rear seatback
before driving. Failure to do so
could result in passengers or
objects being thrown forward
injuring vehicle occupants.
WARNING- Luggage and
Cargo
Do not stack pile or stack lug-
gage or cargo higher than the
seatback in the cargo area. In an
accident the cargo could strike
and injury a passenger. If
objects are large, heavy or must
be piled, they must be secured
in the cargo area.
WARNING- Cargo Area
Do not allow passengers to ride
in the cargo area under any cir-
cumstance. The cargo area is
solely for the purpose of trans-
porting luggage or cargo.
WARNING- Seat
adjustment
Do not adjust the seat while
wearing seat belts. Moving the
seat forward will cause strong
pressure on the abdomen.
Do not place your hand near
the seat bottom or seat track
while adjusting the seat. Your
hand could get caught in the
seat mechanism.
WARNING- Small
Objects
Use extreme caution when pick-
ing up small objects trapped
under the seats or between the
seat and the center console.
Your hands might be cut or
injured by the sharp edges of
the seats mechanism.

Page 27 of 560

311
Safety features of your vehicle
Storing positions into memory
using the buttons on the door
Storing driver’s seat positions
1. Shift the shift lever into P while the
engine start/stop button is ON.
2. Adjust the driver’s seat and out-
side rearview mirror comfortable
for the driver.
3. Press SET button on the control
panel. The system will beep once.
4. Press one of the memory buttons
(1 or 2) within 4 seconds after
pressing the SET button. The sys-
tem will beep twice when memory
has been successfully stored.
When recalling an adjustment mem-
ory button while sitting in the vehicle,
you can be surprised by the setting
chosen if the memory has been
adjusted by someone else. If that
occurs, immediately push the seat
position control knob in the direction
of the desired position to stop further
undesired movement.Recalling positions from memory
1. Press the parking [P] button while
the Engine Start/Stop button is
ON .
2. To recall the position in the memo-
ry, press the desired memory but-
ton (1 or 2). The system will beep
once, then the driver’s seat will
automatically adjust to the stored
position.
Adjusting the control switch for the
driver’s seat while the system is
recalling the stored position will
cause the movement to stop and
move in the direction that the control
switch is moved.
WARNING - Driver
Position Memory System
Never attempt to operate the
driver position memory system
while the vehicle is moving.
This could result in loss of con-
trol, and an accident causing
death or serious injury.

Page 29 of 560

313
Safety features of your vehicle
Also, adjust the headrest as close to
your head as possible. For this rea-
son, the use of a cushion that holds
the body away from the seatback is
not recommended.Adjusting the height up and down
To raise the headrest, pull it up to the
desired position (1). To lower the
headrest, push and hold the release
button (2) on the headrest support
and lower the headrest to the desired
position (3).
✽ ✽

NOTICE
If you recline the seatback towards
the front with the headrest and seat
cushion raised, the headrest may
come in contact with the sunvisor or
other parts of the vehicle.
OYFH034205
WARNING- Headrest
removal/adjustment
Do not operate the vehicle
with the headrests removed.
Headrests can provide critical
neck and head support in a
crash.
Do not adjust the headrest
height while the vehicle is in
motion. Driver may lose con-
trol of the vehicle.
CAUTION
Excessive pulling or pushing
may damage the headrest.
OYG036013

Page 557 of 560

Index
8I
Scheduled maintenance service ......................................7-8
Seat ..................................................................................3-4
Driver position memory system (for power seat) ......3-10
Front seat adjustment - power ......................................3-7
Headrest (for front seat) ..............................................3-12
Rear seat adjustment ..................................................3-14
Seatback pocket ..........................................................3-14
Seat belts ........................................................................3-18
Care of seat belts ........................................................3-27
Pre-tensioner seat belt ................................................3-23
Seat belt precautions ..................................................3-25
Seat belt restraint system ............................................3-18
Smart Cruise Control (SCC)..........................................5-94
Detecting Sensor (Front view camera/Front radar) ..5-106
Headway setting ........................................................5-102
Limitations of the system..........................................5-109
Smart Cruise Control button and switch ....................5-94
To convert to cruise control mode ............................5-108
When the lane ahead is clear ....................................5-102
Smart key ........................................................................4-4
Battery replacement ....................................................4-10
Immobilizer system ....................................................4-11
Mechanical key operations ..........................................4-9
Record your key number ..............................................4-4
Smart key functions ......................................................4-4
Smart key precautions ..................................................4-8Smart trunk ....................................................................4-25
Detecting area ............................................................4-28
How to deactivate the Smart Trunk function using
the Smart key ............................................................4-27
How to use the Smart Trunk ......................................4-25
Special driving conditions ..........................................5-151
Driving at night ........................................................5-152
Driving in flooded areas ........................................5-154
Driving in the rain ..................................................5-153
Driving off-road ......................................................5-154
Hazardous driving conditions ................................5-151
Highway driving ......................................................5-154
Rocking the vehicle ..................................................5-151
Smooth cornering ......................................................5-152
Steering wheel ..............................................................4-46
Electric power steering (EPS) ....................................4-46
Heated steering wheel ................................................4-49
Horn ............................................................................4-50
Tilt and telescopic steering ........................................4-47
Storage compartments ................................................4-154
Center console storage ............................................4-154
Glove box ..................................................................4-154
Sunglass holder ........................................................4-155
Surround View Monitoring (SVM)..............................4-100
S